Vici Metronics CO2 Purifiers


  • VICI Product Numbers 600-2 (GAS SERVICE) and 700-2 (LIQUID SERVICE)
  • Max inlet pressure: 1000 psi / 6895 kPa
  • End Connections: 1/4-inch Male Compression
  • Body Material: Stainless Steel

SAFETY NOTE – Not to be used for purification of oxygen

This purifier is the first new product to be added to’s original line-up.  These purifiers are of the highest quality and commonly employed where the difference between 99.995% pure and 99.999% pure matters.


Vici Metronics P700-2



Vici Metronics P600-2 – $295


VICI Purifer Data Sheet


On and about VICI:

Gas purification is critical to GC performance. Several types of contaminants are detrimental – notably moisture, hydrocarbons, and oxygen. VICI Metronics gas purifier modules are designed to be placed in-line with the GC carrier or detector gas supply to remove these contaminants from the analytical gases prior to their entering the GC.

Gas purification is optimized by a multiple bed format. Each bed functions at a lower contaminant concentration, resulting in a series of contaminant concentration gradients across the length of the gas purifier.

VICI Metronics gas purifiers dramatically reduce contaminant levels and absorb a greater variety of contaminants than other gas purification products. Advanced materials and design features guarantee that the modules will produce gases that are at least a factor of ten higher than a 99.9999% “chromatography grade” cylinder of gas when the purifier is supplied by a 99.995% cylinder.  The cost difference between the two grades of gas will pay for the cost of the gas purifier several times over during its operating life.

  • Original equipment in Agilient® Mass Spec and LC Mass Spec
  • Provide point-of-use gas purification of helium, hydrogen, methane, nitrogen, carbon dioxide, or air
  • Reduce gas impurities from high PPM to low PPB levels
  • Decrease baseline noise and increase GC/MS sensitivity
  • Replace three traps with one purifier

VICI Metronics, Inc. in Poulsbo, Washington is the leading manufacturer of devices and instruments that are used in the generation of calibration gas standards.

The Metronics facility… also houses production of high performance gas specific purifiers suitable for use in GC/MS and LC/MS systems.

VICI Metronics also offers a range of liquid and gas purifiers specialized for Helium, Hydrogen, Nitrogen, Air, Methane, and Carbon Dioxide.  Please contact us for pricing.